Denver · Viking

Dishwasher Repair

Fill, drain, spray and leak diagnostics for Viking integrated and panel-front dishwashers.

Dishwasher with its lower access panel removed, showing the pump assembly and corrugated hoses underneath

What people describe when they call

  • Water left standing in the bottom when the cycle ends
  • Machine hums but never takes on any water
  • Water seeping out at the door and onto the floor
  • Cycle halts partway through and the panel lights blink

How the fault gets found

Fill, wash, drain. Almost every dishwasher fault sits in one of the three, and the blinking panel usually says which. Standing water is a drain fault. A machine that hums without filling is the inlet valve or the float. A leak at the front is the door seal or a cracked sump.

Integrated and panel-front machines add a step before any of that: the custom front and the toe kick have to come off, and they have to go back to the same alignment. Worth saying out loud before a screwdriver appears, which is why it gets said.

  1. Inlet valve, screen and float switch when nothing fills
  2. Drain pump draw, sump and hose loop when water stands
  3. Door seal, hinge tension and machine level when it leaks at the front
  4. Spray arms and the dispenser flap when the wash is poor rather than absent

What it costs

What the work comes to, before you agree to it

Flat $89 service call covering the visit and full diagnosis, credited against the repair once you approve it.

The lines below are ranges, because a firm figure needs someone standing at the machine with the panel off. What you are quoted is a single number for your fault, said out loud and agreed before any work starts — with the $89 service call already credited against it once you approve the repair.

The repair Usually

Igniter or burner assembly
$170–$430
Oven thermostat or heating element
$210–$460
Refrigeration fan or defrost system
$280–$670
Dishwasher pump or control
$200–$430
Control board or touch panel
$460–$670
Compressor or sealed-system repair
$1,380–$3,260

For scale rather than pressure: $7,540–$15,870 is the current spread for a comparable Viking replacement, before installation. Most calls settle in the first four lines above, and on the rare occasion a reading says the machine is not worth spending money on, you hear that in the kitchen and the service call is all you owe.

Viking Pro Repair Denver Bands as worked in Denver, CO (720) 790-9436

In Denver kitchens

What the visit was actually like

4.9/ 51,129 reviews

  • It hummed away but never filled. The inlet screen at the valve was silted up after the water main work on our street. One visit to fix; four stars because the slot moved twice.

    Felicity O.Bonnie Brae

  • It would start, then sit there with the lights blinking. A float switch stuck up with grit from the remodel next door. He freed it, cleaned the sump, and it has run clean since.

    Sela P.Sloan's Lake

  • I was anxious about anyone taking the custom panel off the front. It came off, went back on, and lines up with the cabinets exactly as before. The fault was a tired drain pump.

    Maura K.Bonnie Brae

Book it

Dishwasher Repair in Denver, booked in two minutes on the phone

Visits 8:00 am – 8:00 pm, seven days, line answered 24/7. The $89 service call covers the trip and the diagnosis and comes off the repair once you approve it.