Denver · on the display
No Code at All: Oven Dead, Cooktop Working
Burners catch, the kitchen sounds normal, and the oven behind the same fascia gives nothing at all: no code, no light, no fan. That silence is worth more than a code, because a working cooktop rules out a row of suspects before anyone opens a toolbox.
A live cooktop and a dead oven are not one fault; they are two circuits, and only one of them has stopped.
Viking troubleshooting starts in the same place. If nothing inside the oven lights, the breaker is checked and the supply verified before anything else is suspected; if the oven light works and the cavity still will not heat, the timed control is the next thing looked at, not the board.
| What still works | What that rules out | What is left |
|---|---|---|
| Gas burners lighting with a click | A house with no power, and a tripped main. | The circuit or feed serving the oven side. |
| Burners lighting only with a match | Very little; the igniters are dead too. | Supply to the whole appliance, and no oven use until it is back. |
| Panel lights, oven still cold | The supply, which is clearly arriving. | Settings first, then the heating side itself. |
Follow-ups
The burners light. Does that mean the oven has power?
Not necessarily. On a gas range the burners can be lit with a match even when nothing electrical is working, so a flame proves gas, not power. Say which way yours lit when you ring Viking Pro Repair Denver on (720) 790-9436.
What should I check before booking a visit?
The breaker, and whether a freestanding range is still properly plugged in. On models with a timed bake control, check it is back on manual. Past that, it stops being an owner job. Viking Pro Repair Denver takes it from there on (720) 790-9436.
Could this be the control board?
It can be, and sometimes is. But a board is the expensive answer and the supply is the common one, so the feed and the connections are checked first every time. That order is how Viking Pro Repair Denver works on (720) 790-9436.